Normal Grade Heat Shrink Marker Sleeve
Model number：SBD-SWHF-M
Working temperature: -40ºC ~ +125ºC
Structure
Normal grade heat shrink marker sleeve is developed environment-friendly flame retardant heat shrinkable tube, using specially designed formulation of high polymers, through cross-link by electronic accelerator and continuous expansion.
Usage
SB-SWHF-M Normal Grade heat shrink marker sleeve is widely used for wire and cable harness identification. Normal grade heat shrink marker sleeve can also be used for applications where limited fire hazard characteristics are necessary.
Characteristics
Material | The sleeving shall be fabricated from irradiated, thermally stabilized and flame retarded modified polyolefin compound containing no halogens or cadmium in the formulation |
Application range | Commercial, Industrial environment |
Operating temperature range | -40ºC ~ +125ºC |
Minimum recovery temperature | +85ºC |
Maximum storage temperature | +50ºC |
Shrink ratio | 2:1, 3:1 |
Color | White, Yellow, other color is available if ordered |
Printing mode | Single sided printing and Double sided printing formats available |
Supplied mode | Either Continuous type or Ladder format type is available |
Recommended Printers | Thermal transfer printer |
Specification: Shrink Ratio-2X
Model Number | As Supplied (mm) | After Recovery(mm) | |||
ID(D) | Flatten Width(w) | Double Wall Thickness | ID(d) | Single Wall Thickness | |
SWHF-M-2X-1.6-50-2.5K | 2.00±0.20 | 3.7±0.3 | 0.48±0.10 | ≤0.79 | 0.45±0.06 |
SWHF-M-2X-2.4-50-2.5K | 2.79±0.20 | 5.0±0.3 | 0.48±0.10 | ≤1.18 | 0.49±0.06 |
SWHF-M-2X-3.2-50-2.0K | 3.64±0.23 | 6.3±0.4 | 0.48±0.10 | ≤1.59 | 0.51±0.06 |
SWHF-M-2X-4.8-50-2.0K | 5.26±0.25 | 8.9±0.4 | 0.49±0.10 | ≤2.36 | 0.54±0.06 |
SWHF-M-2X-6.4-50-1.5K | 6.92±0.28 | 11.5±0.4 | 0.50±0.10 | ≤3.18 | 0.56±0.06 |
SWHF-M-2X-9.5-50-1.0K | 10.2±0.32 | 16.7±0.5 | 0.51±0.11 | ≤4.75 | 0.59±0.06 |
SWHF-M-2X-12.7-50-1.0K | 13.5±0.36 | 21.8±0.6 | 0.52±0.11 | ≤6.35 | 0.60±0.07 |
SWHF-M-2X-19-50-0.5K | 20.1±0.40 | 32.2±0.6 | 0.53±0.11 | ≤9.53 | 0.62±0.07 |
SWHF-M-2X-25-50-0.5K | 26.7±0.45 | 42.5±0.7 | 0.55±0.12 | ≤12.7 | 0.63±0.07 |
SWHF-M-2X-38-50-0.5K | 39.8±0.51 | 63.2±0.8 | 0.57±0.12 | ≤19.1 | 0.64±0.07 |
SWHF-M-2X-51-50-0.25K | 53.0±0.56 | 83.9±0.9 | 0.58±0.13 | ≤25.4 | 0.64±0.08 |
SWHF-M-2X-76-50-0.25K | 79.4±0.56 | 125.3±1.0 | 0.59±0.13 | ≤38.1 | 0.64±0.09 |
Specification: Shrink Ratio-3X
Model Number | As Supplied (mm) | After Recovery(mm) | |||
ID(D) | Flatten Width(W) | Double Wall Thickness | ID(d) | Single Wall Thickness | |
SWHF-M-3X-1.6-50-2.5K | 2.00±0.20 | 3.7±0.3 | 0.47±0.10 | ≤0.53 | 0.52±0.06 |
SWHF-M-3X-2.4-50-2.5K | 2.79±0.20 | 5.0±0.3 | 0.47±0.10 | ≤0.79 | 0.57±0.06 |
SWHF-M-3X-3.2-50-2.0K | 3.64±0.23 | 6.3±0.4 | 0.48±0.10 | ≤1.06 | 0.61±0.06 |
SWHF-M-3X-4.8-50-2.0K | 5.26±0.25 | 8.9±0.4 | 0.49±0.10 | ≤1.59 | 0.67±0.06 |
SWHF-M-3X-6.4-50-1.5K | 6.92±0.28 | 11.5±0.4 | 0.50±0.10 | ≤2.36 | 0.71±0.06 |
SWHF-M-3X-9.5-50-1.0K | 10.2±0.32 | 16.7±0.5 | 0.52±0.11 | ≤3.18 | 0.77±0.06 |
SWHF-M-3X-12.7-50-1.0K | 13.5±0.36 | 21.8±0.6 | 0.53±0.11 | ≤4.75 | 0.80±0.07 |
SWHF-M-3X-19-50-0.5K | 20.1±0.40 | 32.2±0.6 | 0.55±0.11 | ≤6.35 | 0.84±0.07 |
SWHF-M-3X-25-50-0.5K | 26.7±0.45 | 42.5±0.7 | 0.56±0.12 | ≤8.47 | 0.86±0.07 |
SWHF-M-3X-38-50-0. 5K | 39.8±0.51 | 63.2±0.8 | 0.57±0.12 | ≤12.9 | 0.89±0.07 |
SWHF-M-3X-51-50-0.25K | 53.0±0.56 | 83.9±0.9 | 0.57±0.13 | ≤17.2 | 0.90±0.08 |
SWHF-M-3X-76-50-0.25K | 79.4±0.56 | 125.3±1.0 | 0.57±0.13 | ≤25.8 | 0.92±0.09 |
Color: Standard color is white and yellow. Other colors are available if ordered.
